Dry Rot

| Home | Service & Repair | Composite Mfg. | Contact |
Example of dry rot repair job performed by Morrison Marine.

Check back to see new pictures.
 
 
Click on pictures below to see a larger version.
 
 
CIGARETTE PROJECT
 
dry rot damage dry rot damage stringers
 
Dry rot damage visible at the forward end of motor locker Dry rot had spread thru stringers to transom and all motor mounts New wood stringers fit and bonded into hull awaiting fiberglass
       
 
gel goat finish gel coat finish finish
 
Interior work finished in gel coat ready to rig engines of motor locker Exterior of transom refinished to match hull sides
       
 
 
MALIBU PROJECT
 
dry rot damage stringers laminated finish
   
Interior and floor removed. Rot damage in stringers Stringers replaced with composite beams, laminated into place. Flotation foam installed Plywood floor laminated into place Ready for delivery
         
 
SEARAY PROJECT
 
dry rot damage removed stringers
 
Boat as received. Dry rot is evident throughout interior All interior structure removed New stringers installed
       
 
floor foam ready for assembly
 
Crosswall supports laminated into place Flotation foam installed. All structure laminated New floor laminated into place. Interior ready for carpet and assembly of seats
       
 
 
EXAMPLE DRY ROT REPAIR
 
dry rot damagedry rot damage tear outtear out
Boat as received. Extensive dry rot damage apparent Floor and interior removed
     
 
cleanup new stringerslaminated stringers finished
All wood removed and interior of
hull ground smooth for rebuild		 New stringers fabricated and installed Completed boat ready for pickup